Home » Archive by category "Uncategorized" (Page 26)

Mindspeed & SpiderCloud Get Small for Big Biz

Mindspeed Technologies Inc. (Nasdaq: MSPD) must have had its spidey senses tingling when it decided to work with a small startup called SpiderCloud Wireless to develop an indoor wireless system for large enterprises. SpiderCloud, of course, has nothing to do with Spiderman, or clouds. Rather,...

Continue reading »

Brocade Boasts Bigger 10GE

Brocade Communications Systems Inc. (Nasdaq: BRCD) is announcing a couple of switching advancements Wednesday and while neither is all that radical, both show the vendor upping its game in key competitive areas. Both products are likely to be highlights of Brocade’s analyst day, being held...

Continue reading »

Comcast on Track for First CCAP Rollouts

Comcast Corp. (Nasdaq: CMCSA, CMCSK) is setting its sights on some small Converged Cable Access Platform (CCAP) deployments before the end of 2012, Vice President of Access Architecture Jorge Salinger said Monday during a Light Reading Cable webinar on the topic. “We hope to deploy,...

Continue reading »

Fiber constraints on FTTH deployments ease

Several sources from the vendor community asserted yesterday at the FTTH Conference in Dallas, TX, that fiber shortages that had hindered the completion of broadband stimulus fiber-to-the-home (FTTH) network deployments have lessened. Delivery schedules are returning to normal, particularly for the larger carriers, the sources...

Continue reading »

SFP+ DAC Part Numbers

 Standard Passive 24AWG – 2127934-x  0.5m thru 7m lengths (MSA supports to 7m)  Longer lengths up to 10m can be engineered to system architecture  Passive 26AWG – 2127933-x  0.5m thru 6m lengths  Passive 28AWG – 2127932-x  0.5m thru...

Continue reading »

SFP+ DAC Assemblies

 Meets MSA SFF-8431 performance requirements up to 7 meters passive & up to 15m active  Broadband serial data rate from 10Mbps to 10Gbps  Pull to release retractable pin latch supports belly to belly application  Passive and active assemblies  Low power...

Continue reading »

Applications for SFP+ DAC Assemblies

 High Speed I/O applications in storage, networking and telecommunications  Supports pluggable I/O connector and cage product line  Offers high density and high data throughput  Cost effective alternative to fiber optic modules in short reach applications  Switches, Routers and Hubs ...

Continue reading »

SFP+ Direct Attach Cable (DAC) Assemblies

 Developed for 10Gbps high speed applications (standard SFP reaches limit at 4.25Gbps)  10 Gigabit Ethernet  Fibre Channel: 1, 2, 4 and 8G FC  Infiniband SDR, DDR and QDR  Fibre Channel over Ethernet (FCoE)  Component requirements  Enhanced EMI skirt...

Continue reading »

CABLE S-PARAMETERS THROUGH MEASUREMENT

Cable S-Parameters through Measurement setup is shown in Figure 4. The through measurement setup shown is for cable end B to cable end A with the response measured B’ to C’. The procedure is then repeated to measure cable through response from end A to...

Continue reading »

CABLE S-PARAMETERS CROSSTALK MEASUREMENT

Cable S-parameters crosstalk measurements setup is shown in Figure 5. The crosstalk measurement setup shown is for the cable end B measured from B’ to C’. The procedure is then repeated to measure cable crosstalk for the other end.   OC3/STM-1 SFP transceiver

Continue reading »