Category: 10Gtek

Leading Data Center Interconnect Manufacturer and Online Retailer (10Gtek) Introduces Active Copper Cables at SC18   Dallas, TX – November 12th, 2018 – 10Gtek, as a leading data center interconnect supplier and online retailer, shows at SC18 launching more new technologies. Besides the most accepted 10G/25G/40G/100G...

1.What is QSFP28 transceiver? A: The QSFP28 transceiver is a high-rate optical module for 100G Ethernet. It employs QSFP form factor. The QSFP28 transceiver has four signal channels, each with a maximum transmission rate of 28 Gbps. It is available in a variety of fiber link distances....

1. What is QSA? A: The QSA is a part of 10Gtek QSFP series products. The QSFP+ port is interconnected with the SFP+ port through the QSA. Its working principle is: QSFP+ originally has four 10 gigabit signal channels, QSA only connects to the first...

1. Why Fiber Cleaning is necessary? The dust is invisible to the naked eye and is very easy to attach to the fiber connector. In the routine maintenance of the fiber optic connector, the fiber optic connector is contaminated with oil, powder and other contaminants. These...

You are invited to visit Super Computing 2018 10Gtek booth-4419, on Nov. 12~15 in Dallas. Aiming to provide total solution for Data center and HPC, 10Gtek team has been working on broaden product coverage and maintain quality control. In this exhibition, besides the classic 10Gb/s,...

We are going to talk about three types of appliance that are usually confusing the users, which are the matrix, switch, splitter. Most of you might have heard of the switch before while the switch we are talking about is not exactly same as the...

HDMI optical cables have been an effective alternative to HDMI copper cables for a few years. However, what exactly is the difference between them? One thing hard to ignore is the difference of material under the coating, in which there is fiber for HDMI optical cable and...