Home » Uncategorized » The SFP+ is an application-agnostic

The SFP+ is an application-agnostic

10Gtek’s SFP Transceiver Modules compatible with Cisco, HP, Brocade,Intel and more. Wholesale/Retail. In Stock. 7 Days Money Back Guarantee. Free Shipping over $500. SFP★ SFP+★ QSFP★ QSFP+★ Optical Transceiver★ Fibre Optic Module

The SFP+ is an application-agnostic ultra-small 10-Gbit/sec optical SFP transceivers module standardized by the SFP MSA Group. Its ultra-small footprint and extremely low power dissipation enables the highest board density 10-Gbit/sec applications in the industry. These factors, in addition to its protocol independence, provide the lowest over all system cost solution for OEMs. The Group is currently formed by more than 75 member companies.
All SFP+ modules support digital diagnostics functions via a 2-pin serial bus, which provide calibrated, real-time measurements of the laser bias current, transmitted optical power, received optical power, internal SFP transceivers temperature, and supply voltage. This diagnostic functionality allows telecommunications and data communications companies to implement reliable performance monitoring of their optical links in a very accurate and cost-effective way. Additionally, Finisar’s hot-pluggable SFP+ SFP transceiverss include a “bail” latch release mechanism for easy insertion and removal into the standardized metallic cage. This cage is press-fit on the host board and includes a new modular heat-sink design to facilitate heat management.

Finisar’s FTRX-1411-3 optical SFP transceivers utilizes a 1310-nm distributed feedback laser and complies with 10GBASE-L Ethernet, SONET OC-192 SR-1, and Fibre Channel 1200-SM-LL-L standards. Its typical power dissipation is under 2W, and it supports an operating temperature range of -5º to +70ºC.
At NFOEC, one FTRX-1411-3 module will be shown interoperating with Vitesse’s new 16-bit, 9.95 to 11.3-Gbit/sec single-chip SFP transceivers, the VSC8473SK. This device is a low-power (1.1W typical), SONET/SDH-compliant 16:1 serializer/deserializer manufactured in 0.13-micron CMOS process with integrated multiplexer, demultiplexer, CMU, clock/data recovery, and limiting amplifier. It operates over an extended temperature range of -5º to +90ºC. The vehicle being used for the test is Vitesse’s VSC8473SFP+ interface card, which contains a 300-pin SFI-4.1 interface, the VSC8473SK SFP transceivers IC and an SFP+ connector and cage. System manufacturers can plug this card into a 300-pin multisource agreement (MSA)-based connector on their line card, in order to quickly integrate low-cost SFP+ modules into their existing systems without consuming in-house design resources.
Another Finisar FTRX-1411-3 module will be shown interoperating with the Quake QT2021, an integrated 10.3 to10.5-Gbit/sec serial-to-XAUI SFP transceivers IC for Ethernet and Fibre Channel applications, running on the Quake QT2021/SFP+ Reference Platform. QT2021 is Quake’s second generation IC to QT2020, which has been shipping since 2001 and is one of the most widely used such ICs today. As with QT2020, QT2021 is field proven in XAUI-based modules and XFI-based system cards, and is fully compliant with IEEE 802.3ae standard, and XENPAK/XPAK/X2 and SFP+ MSAs.
The Quake QT2021/SFP+ Reference Platform is a design kit for evaluation of QT2021 on a system card with SFP+. The reference design includes the QT2021 interfacing to an SFP+ connector via 3 inches of buried XFI traces over standard FR4 material. A XENPAK connector on the XAUI side enables use in existing system cards for further interoperability testing. The multiple built-in test features, loopbacks, and pattern generators and checkers of QT2021 also allow stand-alone testing of the reference design.
Finisar has been shipping 10-km SFP for several months, and has already demonstrated a 40-km DWDM SFP+ version at OFC 2003 in March.

About Us 10Gtek is one of the world’s leading supplier of optical communication series; independent research and development, production and marketing of optical components, modular products until the subsystem. For example: GBIC, SFP, XFP, SFF, 1×9 covers low rate to 10G products, and is fully compatible with the global mainstream vendor equipment. Believe: low-cost solutions, the world’s leading technology, fast delivery, three years free warranty protection of the good cooperation with your company.

Leave a Reply

Your email address will not be published. Required fields are marked *


WordPress spam blocked by CleanTalk.